For the inital treatment add 7.5% ACTIV8 Friction Reducer to the 2-stroke oil (75ml per litre of oil). Each further litre of 2-stroke oil can then be treated with 5% (50ml ACTIV8 Friction Reducer) to maintain the effect.
For pre-mix units
Add ACTIV8 Friction Reducer to a bottle of 2-stroke oil first (shake to mix well), before adding the 2-stroke oil to the fuel at the manufacturer's recemmended ratio. If ACTIV8 Friction Reducer is added to the fuel oil mix after the oil has been mixed at the correct ratio, the mixture will become too rich and may cause loss of performance.
For injection feed units (separate 2-stroke oil tank)
Add ACTIV8 Fricion Reducer to a bottle of 2-stroke oil first (shake to mix well), before adding the 2-stroke oil into the oil tank. If ACTIV8 Friction Reducer is added directly to the oil tank, the ACTIV8 Friction Reducer will not disperse sufficiently within the 2-stroke oil before use.
The exact ratio of ACTIV8 to fuel oil for high performance use, such as racing, can only be ascertained whilst carrying out tuning trials.
It is not necessary to include ACTIV8 with every application of oil to fuel as ACTIV8 leaves a residual film. The duration of which depends on the condition of the engine and the environment in which it is working. Experience has shown that, under standard motoring conditions, it is sufficient to add ACTIV8 to the lubricating fuel oil only once in every two or three applications of the fuel oil. Under high load or racing conditions, experience has shown that the use of ACTIV8 in all oil mixes are prefered.